| Content | The Silver PowerShot SX740 HS Digital Camera from Canon. Boasting a 20.3MP CMOS sensor and 40x optical zoom, this all-in-one point-and-shoot can capture things near and far. Helping the far end of its 24-960mm zoom range (35mm equivalent) is optical image stabilization which keeps your photos sharp and in focus. Zoom Framing Assistant makes it easier to track subjects at the long end of the focal length by quickly zooming out and then back in at the press of a button once you’ve located your subject. Canon’s DIGIC 8 Image Processor helps the camera keep up with your shooting, allowing for 10-fps continuous shooting with AF lock on. The 20.3MP sensor is also capable of 4K video and 4K time-lapse recording. Framing for videos and photos can be done via the 3.0″ LCD screen on the rear of the device, which can tilt 180° for selfies. Built-in Wi-Fi and Bluetooth allow the camera to connect to compatible mobile devices with the Canon Camera Connect app installed and enable quick editing and sharing of photos. 20.3MP CMOS sensor provides a wide ISO range for low-light shooting. 40x optical zoom and a further 40x digital zoom let you shoot far-away subjects. Capture incredibly detailed and vibrant video and time lapses at 30fps in cinematic 4K quality. Canon’s DIGIC 8 Image Processor provides reliable autofocus performance and fast 10-fps continuous shooting. | The Atlas® 9OHSC two post above ground lift is the perfect choice for those smaller commercial repair facilities - 9,000 lb. Capacity
- Overhead, Open-Floor Lift
- Single-Piece Column Design
- Overall Height: 142″ (11′ 10″)
- 3-Stage Front Arms/2-Stage Rear Arms
- Automatic Arm Restraints
- Single-Point Lock Release
- Rubber Guards on Carriages
- Dual Hydraulic Chain-Drive Cylinders
- Free 12 Piece Truck Adapter Set
- Mounting Hardware Included
- Shipping Weight: 1,430 lbs.
- 5 yr Structural – 2 yr Hydraulic Warranty
| Atlas® ATTD-9OHSC-SS Specifications | | Capacity | 9,000 LB. | | Overall Height | 142″ (11′ 10″) | | Overall Floor Width | 133 1/2″ (11′ 1 1/2″) | | Outside Column to Outside Column | 125 1/2″ (10′ 5 1/2″) | | Maximum Lift Height (Without Adapters) | 76 3/4″ | | Maximum Lift Height (With Adapters) | 87 3/4″ | | Minimum Arm Height | 4″ | | Inside Column | 109 1/2″ (9′ 1 1/2″) | | Drive Thru | 100 1/2″ (8′ 4 1/2″) | | Column Size | 8″ x 9 3/8″ | | Column Thickness of Steel | 5mm | | | Base Of Lift | 16 3/4″ x 17 3/4″ | | Motor/Electrical Requirement | 220 volt single (1) phase.
A 30 amp breaker is recommended | | Oil Requirement | 3-5 Gallons AW32/AW46 | | Shipping Weight | 1,430 LBS. | | Adapter Heights | 4 Each 2″, 3″, 6″ | | Arm Hole/Adapter Peg Size | 1.5″ | | | Requires a minimum of 4″ of concrete with a 3000 psi. rating | | The Atlas® 412 is a commercial 4 post car lift with 12,000 pounds of lift capacity. The Atlas® 412 is tested to ensure that this lift system will perform flawlessly at its rated capacity. The Atlas® 412 has been manufactured to the same exacting specifications for many years. The Atlas® 412 uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift. Many competitors use an “old style” chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to “level” properly and the exposed hydraulic cylinder is responsible for numerous “door dings”. Finally, the Atlas® 412 features “tracks” between the runways to allow the use of a rolling bridge jack (such as the Atlas® RJ6BK) on the lift. Rolling jacks sold separately. Features & Benefits - 12,000 lb. Capacity
- Heavy Duty, Commercial Grade
- Extra Tall, Extra Wide & Extra Long
- Diamond Plated Runways
- Air Operated Single Point Lock Release (External Air Supply Required)
- Lock Ladder Design
- Double Lock Safety System
- Powder Coat Finish
- Steel Approach Ramps Included
- Additional Drive off Ramps Available (Sold Separately)
- Runway Extensions Available (Sold Separately)
- Mounting Hardware Included
- 220volt/1phase Electric Operation (Requires a 30amp Breaker)
- 5 yr Structural – 2 yr Hydraulic Warranty – Parts Only
Atlas® ATTD-412 Specifications | Capacity | 12,000 lb. | | Lifting Height | 77 3/4″ (6′ 5 3/4″) | | Overall Width Of Columns (Without Motor) | 126 1/4″ (10′ 6 1/4″) | | Overall Width Of Columns (With Motor) | 135 1/4″ (11′ 3 1/4″) | | Overall Length With Approach Ramp | 236 1/2″ (19′ 8 1/2″) | | Length Between Columns | 183 1/4″ (15′ 3 1/4″) | | Runway Length | 194 1/2″ (16′ 2 1/2″) | | Runway Width | 20″ | | Thickness Of Runway | 7 1/2″ | | Width Between Runways | 43 1/4″ (w/ Rail 39 3/4″) | | Outside Runway To Outside Runway | 83 1/4″ (6′ 11 1/4″) | | Clearance Under Runways | 70 1/4″ (5′ 10 1/4″) | | Clearance Between Columns | 112 5/8″ (9′ 4 5/8″) | | Height Of Columns | 89 3/4″ (7′ 5 3/4″) | | Maximum Wheel Base | 185″ (15′ 5″) | | Drive Thru | 98″ (8′ 2″) | | Air Requirement | 1.5″85-115 PSI(EXTERNAL AIR SUPPLY REQUIRED) | | Motor/Electrical Requirement | 220 volt single (1) phase.A 30 amp breaker is recommended | | Oil Requirement | 3-5 GallonsAW32/AW46 (NOT INCLUDED) | | The Atlas® 408SL super deluxe portable vehicle storage lift is designed for those car enthusiasts who demand the absolute best look and superior quality. The 408SL has all the great features of our Atlas® Garage Pro Series 4 post hobbyist lifts, but incorporates many features found only on our Atlas® commercial grade 4-post lifts. All columns incorporate two special bends which help to increase the column strength. These strategic bends also increase the surface area for the slide block to travel. Horizontal cables are “hidden” inside of the cross tubes. Professional grade wheel covers are used to eliminate almost all exposure of cables and the double lock system. The Atlas® 408SL has “more metal” and weighs over 100 lbs. more than other hobbyist lifts based upon the same column and runway configuration. The Atlas® 408SL is built to the same commercial lift standards as our Atlas® 412 and Atlas® 414 four post lifts, but also offers portability (Caster Kit included). If you are looking for a lift that stands out from all the other storage lifts sold in the USA, then take a good look at the Atlas® 408SL. - 8,000 lb. Capacity
- Free Standing/Portable Design
- Diamond Plated Runways
- Single point lock release
- Columns incorporate two special bends to increase column strength.
- Larger Column Size
- Double Lock Safety System
- Higher quality powder coating (steel gray color)
- Cables hidden in Columns & Cross Tubes
- Commercial Grade Wear Blocks
- Power Unit can be positioned at any corner
- Wider Access Between Runways
- Caster Kit With Polyurethane Wheels Included
- Steel Approach Ramps Included
- Steel Jack Tray Included
- Four Plastic Drip Trays Included
- Wheel Stops Included
- Anchor Bolts Optional (Sold Separately)
- 110volt Electric Operation (Requires 30amp Breaker)
- Shipping Weight: 1,965 lbs.
- 2 yr Structural – 2 yr Hydraulic Warranty – Parts Only
| Atlas® 408SL Specifications | | Capacity | 8,000 lb. | | Lifting Height To Top Of Runway | 73 1/4″ (6′ 1 1/4″) (Not on Lock) | | Clearance Under Runways | 68 1/2 (5′ 8 1/2″) | | Height Of Columns | 83″ (7′ 11″) | | Overall Width (Without Motor) | 109 5/8″ (9′ 1 5/8″) | | Overall Width (With Motor) | 117 1/2″ (9′ 9 1/2″) | | Overall Length With Approach Ramp | 205 3/8″ (17′ 1 3/8″) | | Approach Ramp | 35″ (2′ 11″) | | Runway Width | 21 1/2″ (w/ Rails) or 18 3/4″ (Driving Surface) | | Runway Length | 166 3/4″ (13′ 10 3/4″) | | Runway Thickness | 4 3/4″ | | Width Between Runways | 37 1/4″ (3′ 1 1/4″) | | Width Between Runway Rails | 34 3/8″ (2′ 10 3/8″) | | Outside Runway To Outside Runway | 74 3/4″ (6′ 2 3/4″) | | Clearance Between Columns | 95 1/2″ (7′ 11 1/2″) | | Length Between Columns | 156″ (13′) | | Maximum Wheel Base | 154″ (12′ 10″) | | Drive Thru (Outside Of Tire To Outside Of Tire) | 82″ (6′ 10″) | | Motor/Electrical Requirement | 110 Volt, 30 AMP BREAKER REQUIRED | | Shipping Weight | 1,965 lb. | | The Atlas 408SL super deluxe portable vehicle storage lift is designed for car enthusiasts who demand the absolute best look and superior quality. The 408SL has all the great features of our Atlas Garage Pro Series 4 post hobbyist lifts, but incorporates many features found only on our Atlas commercial grade 4-post lifts. All columns incorporate two special bends which help to increase the column strength. These strategic bends also increase the surface area for the slide block to travel. Horizontal cables are “hidden” inside of the cross tubes. Professional grade wheel covers are used to eliminate almost all exposure of cables and the double lock system. The Atlas 408SL has “more metal” and weighs over 100 lbs. more than other hobbyist lifts based upon the same column and runway configuration. The Atlas 408SL is built to the same commercial lift standards as our Atlas 412 and Atlas 414 four post lifts, but also offers portability (Caster Kit included). If you are looking for a lift that stands out from all the other storage lifts sold in the USA, then take a good look at the Atlas 408SL. - 8,000 lb. Capacity
- Free Standing/Portable Design
- Diamond Plated Runways
- Single point lock release
- Columns incorporate two special bends to increase column strength.
- Larger Column Size
- Double Lock Safety System
- Higher quality powder coating (steel gray color)
- Cables hidden in Columns & Cross Tubes
- Commercial Grade Wear Blocks
- Power Unit can be positioned at any corner
- Wider Access Between Runways
- Caster Kit With Polyurethane Wheels Included
- Steel Approach Ramps Included
- Steel Jack Tray Included
- Four Plastic Drip Trays Included
- Wheel Stops Included
- Anchor Bolts Optional (Sold Separately)
- 110volt Electric Operation (Requires 30amp Breaker)
- Shipping Weight: 1,965 lbs.
- 2 yr Structural – 2 yr Hydraulic Warranty
| Atlas 408SL Specifications | | Capacity | 8,000 lb. | | Lifting Height To Top Of Runway | 73 1/4″ (6′ 1 1/4″) (Not on Lock) | | Clearance Under Runways | 68 1/2 (5′ 8 1/2″) | | Height Of Columns | 83″ (7′ 11″) | | Overall Width (Without Motor) | 109 5/8″ (9′ 1 5/8″) | | Overall Width (With Motor) | 117 1/2″ (9′ 9 1/2″) | | Overall Length With Approach Ramp | 205 3/8″ (17′ 1 3/8″) | | Approach Ramp | 35″ (2′ 11″) | | Runway Width | 21 1/2″ (w/ Rails) or 18 3/4″ (Driving Surface) | | Runway Length | 166 3/4″ (13′ 10 3/4″) | | Runway Thickness | 4 3/4″ | | Width Between Runways | 37 1/4″ (3′ 1 1/4″) | | Width Between Runway Rails | 34 3/8″ (2′ 10 3/8″) | | Outside Runway To Outside Runway | 74 3/4″ (6′ 2 3/4″) | | Clearance Between Columns | 95 1/2″ (7′ 11 1/2″) | | Length Between Columns | 156″ (13′) | | Maximum Wheel Base | 154″ (12′ 10″) | | Drive Thru (Outside Of Tire To Outside Of Tire) | 82″ (6′ 10″) | | Motor/Electrical Requirement | 110 Volt, 30 AMP BREAKER REQUIRED | | Shipping Weight | 1,965 lb. | | The Atlas® 9KBPX is an economically designed baseplate two-post lift great for low ceiling garages. The total column height of 111 ½” (9 feet 3 ½ inches) allows this lift to be installed in almost any professional or home garage with a ceiling as low as 9 feet 6 inches. The Atlas® 9KBPX “chain over roller” lift features a spring loaded Secondary Lock System (SLS) that automatically engages in the event of a slack or broken chain. The reliable dual chain-drive cylinders, symmetric arms, and automatic arm restraints make this the perfect choice for “Mr. Homeowner” or small commercial shop looking to service cars, SUV’s and light duty trucks (not recommended to lift Diesel Dually or other large trucks). Features & Benefits - 9,000 lb. Capacity
- Baseplate, Open-Top Style Lift
- Designed For Low Ceiling Clearance – 9′ 3 ½” Columns
- Symmetric Arms
- Dual Hydraulic Chain-Drive Cylinders
- Secondary Lock System (SLS)
- Free 8 Piece Truck Adapter Set
- Automatic Arm Restraints
- Dual Point Lock Release
- Mounting Hardware Included
- 2 yr Structural – 1 yr Hydraulic Warranty – Parts Only
Atlas® XH-9KBPX Specifications | Capacity | 9,000 lb. | | Overall Height | 111 1/2″ (9′ 3 1/2″) | | Overall Floor Width | 134 1/2″ (11′ 2 1/2″) | | Outside Column to Outside Column | 124 7/8″ (10′ 4 7/8″) | | Maximum Lift Height (Without Adapters) | 74 1/2″ | | Maximum Lift Height (With Adapters) | 81″ | | Minimum Arm Height | 4″ | | Inside Column | 110″ (9′ 2″) | | Drive Thru | 101″ (8′ 5″) | | Column Size | 7 1/4″ x 11″ | | Column Thickness of Steel | 5mm | | Base Of Lift | 14 1/4″ x 18 1/4″ | | Motor/Electrical Requirement | 220 volt single (1) phase.
A 30 amp breaker is recommended | | Oil Requirement | 3-5 Gallons AW32/AW46 (NOT INCLUDED) | | | | Adapter Heights | 4 Each 1.5″, 5″ | | Arm Hole/Adapter Peg Size | 1.5″ | |
Evelyn Jackson –
Harper Thomas –