TRIUMPH NSS-8 8000Lbs 4 Post Storage Service Car Auto Lift Truck Hoist

Name: TRIUMPH NSS-8 8000Lbs 4 Post Storage Service Car Auto Lift Truck Hoist
Brand: My Store
SKU: 2846
Availability: InStock
Rating: 5.00 (2 reviews)

Add to wishlist

$2,100.00

(2 reviews)

29 people are viewing this right now

Estimated Delivery:

13 - 20 Apr, 2026

Guaranteed safe & secure checkout

Product details

DESCRIPTION

NSS-8 8,000 lb Service Storage Four Post Automotive Lift

This car lift is great for storage or service. This lift comes standard with a caster kit, jack tray, three drip trays, steel oil tank power unit and aluminum ramps. The drips trays will keep any fluid from the top vehicle from dripping on the bottom vehicle. Jack tray allows you to use a bottle jack or floor jack to lift one end of your vehicle. Caster kit allows you to easily move your auto lift around the garage. It is easy to set up and completely portable. If you need to store your car this is the lift for you. A time tested design that has been used for over 20 years. With automatic locking that engage at 10 different positions as you raise the vehicle.

Specifications

Capacity	8,000 lbs.
Overall Height	84″
Overall Length	175″
Overall Width	106″
Lift Height	72″
Height Under Runway	69″
Runway Length	165″
Drive Thru Width	93″
Runway Width	18″
Lowered Height	5″
Locking Positions	10
Base Plate Size	12″x12″
Lock Release	Single Point
Lift Time	40 Seconds
Voltage	110 Volts
Shipping Weight	1,600 lbs.
Warranty	2-Year

Quick Comparison

TRIUMPH NSS-8 8000Lbs 4 Post Storage Service Car Auto Lift Truck Hoist remove Toro 22″ Personal Pace® Auto-Drive (22 Inch) 163cc Briggs Self-Propelled Walk Mower remove Atlas Apex 8 8,000 lb 4-Post Lift Car remove Atlas PV10PX 10,000 lb Overhead 2-Post Lift Car remove Ascend 12T Sit-On-Top Kayak – Stable & Spacious Fishing and Recreation Kayak remove Atlas 14,000 lbs Commercial 4 Post Lift remove

Name TRIUMPH NSS-8 8000Lbs 4 Post Storage Service Car Auto Lift Truck Hoist remove Toro 22″ Personal Pace® Auto-Drive (22 Inch) 163cc Briggs Self-Propelled Walk Mower remove Atlas Apex 8 8,000 lb 4-Post Lift Car remove Atlas PV10PX 10,000 lb Overhead 2-Post Lift Car remove Ascend 12T Sit-On-Top Kayak – Stable & Spacious Fishing and Recreation Kayak remove Atlas 14,000 lbs Commercial 4 Post Lift remove

Image

SKU 2846 EGO-5 lifter57 lifter17 AC20903 Lifter38

Rating

5.00

2 reviews

5.00

2 reviews

5.00

2 reviews

5.00

2 reviews

5.00

2 reviews

5.00

2 reviews

Price

$2,100.00

$303.24

$2,649.00

$2,500.00

$550.00

$2,500.00

Stock

50 in stock

Availability 50 in stock 50 in stock 50 in stock 50 in stock 50 in stock

Add to cart

Description

Content

DESCRIPTION

NSS-8 8,000 lb Service Storage Four Post Automotive Lift

Specifications

Capacity	8,000 lbs.
Overall Height	84″
Overall Length	175″
Overall Width	106″
Lift Height	72″
Height Under Runway	69″
Runway Length	165″
Drive Thru Width	93″
Runway Width	18″
Lowered Height	5″
Locking Positions	10
Base Plate Size	12″x12″
Lock Release	Single Point
Lift Time	40 Seconds
Voltage	110 Volts
Shipping Weight	1,600 lbs.
Warranty	2-Year

A Mower That Adjusts to You – No knobs, no levers, no messing around. Grab the easy-to-steer handle and go with Personal Pace Auto-Drive.
Supercharged Cutting Machine – We’ve supercharged the Recycler Cutting System creating a performance boosting machine through Vortex Technology.
Super Bagger – Get the job done more easily than ever with our new Super Bagger, shaped for easier lifting, no-shake pouring and zero-hassle cleanup.
Supercharged Cutting Machine – We’ve supercharged the Recycler Cutting System creating a performance boosting machine through Vortex Technology.
Hassle-Free Maintenance – With a Toro, there’s no oil change – ever; Just Top it Off.
Time Saver – Cut a wider path with each pass with an extra-long 22 in. blade to mow more in less time.
Bag On Demand. Easily change from mulching to bagging with the quick-connect bagging system.
Traction High Wheels Provides Control – Delivering easier maneuverability through turns with greater cutting precision over uneven terrain.

The Atlas APEX8 is an ALI Certified version of our most popular 4-post hobbyist lift, the Atlas Garage PRO8000. Perfect for the customer with too many cars and not enough space. The APEX8 allows the user to easily double their space by stacking most passenger cars. The Atlas APEX8 is designed and built for use by homeowners or restoration shops. This lift is not recommended for use in commercial repair shops where it would be raised and lowered several times per day. The Atlas APEX8 is nearly 200 lbs. heavier than comparable lifts in the market. It includes a free caster kit with polyurethane wheels. The caster kit can be installed or removed in just a matter of minutes making the lift portable and allowing it to move between bays or even outside. With those features and with the added peace of mind of the ALI Certification the APEX8 is one of the best values in our four-post hobbyist product line.

ALI Certified Lift
8,000 lb. Capacity
Free Standing/Portable Design
Powder Coat Finish
Single Point Lock Release
Lock Ladder Design
Double Lock Safety System
Steel Approach Ramps Included
Wheel Stops Included
Two Wheel Chocks Included
Caster Kit with Polyurethane wheels Included
Anchor Bolts Optional (Sold Separately)
Perfect for Storage or Working on Vehicles
110volt Electric Operation (Requires 30amp Breaker)
Shipping Weight: 2,000 lbs.
5 yr Structural – 2 yr Hydraulic Warranty

Atlas Apex 8 Specifications
Capacity	8,000 lb.
Lifting Height To Top of Runway	72″ (6′)
Clearance Under Runways	67″ (5′ 7″)
Height of Columns (Including Nuts)	86 5/8″ (7′ 2 5/8″)
Overall Width (Without Motor or Casters)	104″ (8′ 8″)
Overall Width (With Motor)	114″ (9′ 6″)
Overall Length without Approach Ramps (Including Lock Release Bar)	186 1/2″ (15′ 6 1/2″)
Overall Length with Approach Ramps	207 5/6″ (17′ 3 5/6″)
Approach Ramps	37 1/2″ (3′ 1 1/2″)
Runway Width	18 2/3″
Runway Rail Width	2 1/2″
Runway Length	169 1/2″ (14′ 1 1/2″)
Runway Thickness	4 1/3″
Width Between Runways	38″ (3′ 2″)
Width Between Runway Rails	33 (2′ 9″)
Outside Runway to Outside Runway	75 1/4 (6′ 3 1/4″)
Clearance Between Columns	94″ (7′ 10″)
Length Between Columns	157 1/3″ (13′ 1 1/3″)
Maximum Wheel Base	154 (12′ 9″)
Drive Thru (Outside of tire to outside of tire)	80 1/4″ (6′ 8 1/4″)
Motor/Electrical Requirement	110 Volt, 30 AMP BREAKER REQUIRED
Shipping Weight	2,000 lb.

10,000 lb. capacity
Commercial Grade
Adjustable Height – 11′ 11 1/8″ or 12’3″
Asymmetric/Symmetric Arms
Automatic Arm Restraints
“Padded” Shut-Off Bar
Padded Carriages
Single Point Lock Release
Direct-Drive Cylinders
Powder Coat Finish
Free 12 Piece Truck Adapter Set
Mounting Hardware Included
Shipping Weight: 1,905 lbs.
5 yr Structural – 2 yr Hydraulic Warranty – Parts Only

Atlas® ATTD-PV10PX Specifications
Capacity	10,000 LB.
Overall Height	143 1/8″ (11’ 11 1/8”) or 146 7/8” (12’ 2 7/8”)
Overall Floor Width	137 1/2″ (11’ 5 1/2”)
Outside Column to Outside Column	125″ (10’ 5″)
Maximum Lift Height (Without Adapters)	71 7/8″
Maximum Lift Height (With Adapters)	82 7/8″
Minimum Arm Height	4 3/8″
Inside Column	110 3/8” (9’ 2 3/8”)
Drive Thru	96” (8’)
Column Size	7 1/2″ x 14 1/2″
Column Thickness of Steel	6mm
Base Of Lift	17 1/2″ x 20 1/2″
Motor/Electrical Requirement	220 volt single (1) phase. A 30 amp breaker is recommended
Oil Requirement	3-5 Gallons AW32/AW46 (NOT INCLUDED)
Shipping Weight	1,905 LBS.
Adapter Heights	4 Each 2”, 3”, 6”
Arm Hole/Adapter Peg Size	1.5”

Requires a minimum of 4″ of concrete with a 3000 psi. rating

Product Description

Explore open waters with confidence and comfort in the Ascend 12T Sit-On-Top Kayak, an ideal companion for fishing trips, lake paddling, or coastal exploration. With its advanced tunnel hull design, the 12T offers unmatched stability, making it perfect for beginners and experienced paddlers alike.

Built for adventure, this kayak features a wide-open deck layout that provides plenty of room to move, cast, and store gear. Its adjustable deluxe padded seat ensures long hours on the water remain comfortable, while molded foot braces give you solid support. Whether you’re paddling through calm lakes or navigating gentle rivers, the Ascend 12T delivers excellent tracking and maneuverability.

Designed with serious anglers in mind, it includes rod holders, bungee storage, and molded-in gear tracks so you can fully customize your setup. The rotomolded, high-density polyethylene construction provides long-lasting durability and resistance to impact, while the flat standing platform allows stable standing for casting and sight-fishing.

From sunrise fishing sessions to afternoon lake cruising, the Ascend 12T blends performance, comfort, and rugged build quality—so you can paddle further, fish longer, and explore harder.

Specifications

Feature	Description
Brand	Ascend
Model	12T
Kayak Type	Sit-On-Top
Material	Rotomolded High-Density Polyethylene
Length	12 ft.
Width	31 in.
Weight	Approx. 77 lbs
Maximum Capacity	350 lbs
Hull Design	Tunnel Hull
Seat	Deluxe Adjustable Padded Seat
Foot Braces	Molded-In
Storage Options	Bow and Stern Storage Areas with Bungee Straps
Accessory Mounting	Gear Tracks for Rod Holders & Accessories
Cup Holders	Yes
Standing Platform	Yes – Flat, Non-Slip
Rod Holders	Integrated
Ideal Use	Fishing, Recreation, Lake, Slow-Moving Rivers
Color Options	Varies (typically Desert Storm, Titanium, etc.)
Warranty	Limited Manufacturer Warranty

Why Choose the Ascend 12T?

Rock-Solid Stability – Tunnel hull lets you stand with ease
Spacious Design – Open deck for gear, freedom of movement, and comfort
Fishing Ready – Built-in rod holders and gear mounts for full customization
Comfort First – Adjustable high-back seat and ergonomic layout
Rugged Durability – Built tough for long-term adventures

The Atlas® 414 is a 4 post lift with 14,000 pounds of lift capacity designed for commercial use. This lift is designed and built to commercial grade standards and will provide many years of service. The Atlas® 414 uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift. Many competitors use an “old style” chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to “level” properly and the exposed hydraulic cylinder is responsible for numerous “door dings”. Finally, the Atlas® 414 features “tracks” between the runways to allow the use of a rolling bridge jack (such as the Atlas® RJ8000BK) on the lift. Rolling jacks sold separately.

Features & Benefits

14,000 lb. Capacity
Heavy Duty, Commercial Grade
Extra Tall, Extra Wide & Extra Long
Diamond Plated Runways
Air Operated Single Point Lock Release (External Air Supply Required)
Lock Ladder Design
Double Lock Safety System
Powder Coat Finish
Steel Approach Ramps Included
Additional Drive off Ramps Available (Sold Separately)
Runway Extensions Available (Sold Separately)
Mounting Hardware Included
220volt/1phase Electric Operation (Requires a 30amp Breaker)
5 yr Structural – 2 yr Hydraulic Warranty – Parts Only

Atlas® ATTD-414 Specifications

Capacity	14,000 lb.
Lifting Height	80″ (6′ 8″)
Overall Width Of Columns (Without Motor)	130 7/8″ (10′ 10 7/8″)
Overall Width Of Columns (With Motor)	138 7/8″ (11′ 6 7/8″)
Overall Length With Approach Ramp	255″ (21′ 3″)
Length Between Columns	197 1/4″ (16′ 5 1/4″)
Runway Length	208 5/8″ (17′ 4 5/8″)
Runway Width	20″
Thickness Of Runway	8 3/4″
Width Between Runways	46 7/8″ (w/ Rail 44 3/8″)
Outside Runway To Outside Runway	86 7/8″ (7′ 2 7/8″)
Clearance Under Runways	71 1/4″ (5′ 11 1/4″)
Clearance Between Columns	116″ (9′ 8″)
Height Of Columns	91 1/8″ (7′ 7 1/8″)
Maximum Wheel Base	197″ (16′ 5″)
Drive Thru	102 1/8″ (8′ 6 1/8″)
Air Requirement	85-115 PSI (EXTERNAL AIR SUPPLY REQUIRED)
Motor/Electrical Requirement	220 volt single (1) phase.A 30 amp breaker is recommended
Oil Requirement	3-5 GallonsAW32/AW46 (NOT INCLUDED)

Weight N/A N/A N/A N/A N/A N/A

Dimensions N/A N/A N/A N/A N/A N/A

Additional information

Sold 0 0 0 0 0 0

Shipping

Subtotal	$0.00
Total	$0.00