The Atlas 412 is a commercial 4 post car lift with 12,000 pounds of lift capacity.

The Atlas 412 is tested to ensure that this lift system will perform flawlessly at its rated capacity. The Atlas 412 has been manufactured to the same exacting specifications for many years.

The Atlas 412 uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift.

Many competitors use an “old style” chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to “level” properly and the exposed hydraulic cylinder is responsible for numerous “door dings”.

Finally, the Atlas 412 features “tracks” between the runways to allow the use of a rolling bridge jack (such as the Atlas RJ6BK) on the lift. Rolling jacks sold separately.

Features & Benefits

• 12,000 lb. Capacity
• Heavy Duty, Commercial Grade
• Extra Tall, Extra Wide & Extra Long
• Diamond Plated Runways
• Air Operated Single Point Lock Release (External Air Supply Required)
• Lock Ladder Design
• Double Lock Safety System
• Powder Coat Finish
• Steel Approach Ramps Included
• Additional Drive off Ramps Available (Sold Separately)
• Runway Extensions Available (Sold Separately)
• Mounting Hardware Included
• 220volt/1phase Electric Operation (Requires a 30amp Breaker)
• 5 yr Structural – 2 yr Hydraulic Warranty

Atlas ATTD-412 Specifications

The Cub Cadet XT2 GX54 D garden tractor features a powerful Kohler 7000 series engine and a heavy-duty Tuff Torq transmission. This stylish, dealer-exclusive model features an AeroForce cutting deck that produces finer grass clippings and fewer clumps. It also features a FastAttach blade system that allows you to change the mower blades in minutes without any tools or lift. Cup holders, armrests, a high-back seat and cruise control offer added comfort. This model also features rear locking differential, allowing the tractor extra traction on hills and slippery conditions. 25HP/725cc Kohler 7000 series HD KT740 engine 54-inch, 3-blade fabricated deck Tuff Torq K62 Hydrostatic Transmission with Rear Locking Differential 3 gallon fuel capacity Ground speed: 5.5 mph forward/3 mph reverse Front wheels: 16 x 6.5 in - 8 in Rear wheels: 22 x 9.5 in - 12 in 3-year consumer warranty Model: 14AQA6TMA10

Newly redesigned, the Cub Cadet XT2 LX42 lawn tractor features a Kawasaki FR series twin cylinder engine and a Tuff Torq transmission. This stylish, redesigned dealer exclusive model features an AeroForce cutting deck that produces finer grass clippings and fewer clumps. A wide variety of attachments can be added for all-season function.

• 18HP/603cc Kawasaki FR Series Twin Cylinder Engine
• 42-inch, 3-blade fabricated deck
• Tuff Torq K46 Hydrostatic Transmission
• 3 gallon fuel capacity
• Ground speed: 5.5 mph forward/3 mph reverse
• Front wheels: 15 x 6 in - 6 in
• Rear wheels: 20 x 8 in - 8 in
• 3-year consumer warranty
• Model: 13AGA1TEA10

Radiologists need powerful computing solutions that can deliver precision, accuracy, and speed. The Dell Precision 5860 workstation is meticulously designed to meet these demanding needs. With its exceptional performance and customization options, the Precision 5860 empowers radiologists to navigate the intricacies of medical imaging with confidence and efficiency. It is a robust platform for image processing, data analysis, and diagnostic tasks

DeWalt 20V Brush String Trimmer #DCST925M1

20V MAX* 13 IN. CORDLESS STRING TRIMMER WITH CHARGER AND 4.0AH BATTERY

Dannmar DB-70 Automatic Wheel Balancer 10″-28″ Rim Capacity
Your shop can install new brake rotors, pads, and tires on your customer's car, but they will judge everything they paid for on how perfectly their tires were balanced. Give them everything they deserve and know that a vibration-free tire balance with Dannmar's DB-70 Wheel Balancer is the shining star on your work.

Smooth Dannmar wheel balancer performance is available for both you and your customers. And best of all, Dannmar wheel balancer equipment is easy for your techs to operate and affordable for your shop. With many years of refining our balancing technologies, our wheel balancers have achieved unsurpassed quality. Dannmar's time-tested direct-drive system has spot-on accuracy ensuring that wheels are balanced and vibration-free. Wheel balancers are essential tools and revenue generators for professional auto and tire shops. Almost every customer who purchases new tires will want to add full wheel balancing to their repair order. Increase your sales and customer's vehicle satisfaction with a Dannmar wheel balancer.

Dannmar's DB-70 Wheel Balancer Keeps Everything Running Smoothly
Dannmar's DB-70 wheel balancer handles wheels up to 28″ diameter. The DB-70 is a highly accurate and dependable balancer that features Dannmar's Digital Sensor Technology providing excellent reliability.

Most wheels can be quickly mounted to the balancer with the DB-70's multi-size center cones. The full rubber perimeter no-mar "Quick-Nut" bell adapter carefully and tightly secures the tire and wheel.

An easy touch-pad panel displays tire and wheel assembly graphics. This helps simplify entry of wheel data and supports technicians through balancing procedures.

With the wheel setup on the balancer, the DB-70 automatically calculates the precise weight required to achieve an optimal balance. The brightly displayed LEDs indicate the exact amount and location of weight in just seven seconds. A full menu of time-saving features, including Dynamic and Static settings, allows you to balance most wheels with minimal effort and quick speed.

Dannmar's DB-70 wheel balancer is ruggedly built and provides perfectly balanced wheels every time. With a proven dynamic and static wheel balancer to ensure smooth-spinning results, Dannmar provides a machine your technicians can use to keep the workflow moving and your busy customers happy.